Temperature Measurement Heating Test Corner For Temperature Test Of Electronic Product
Product information:
The temperature measurement corner conforms to the standard requirement of IEC60950-1 : 2005. It is designed and manufactured to provide the required environment for the temperature rising test of all kinds of electrical, electrical products. It can be customized according to the different testing samples.
The Black Test Corner for temperature measurement is conformed by a trihedral one of black painting plywood, with a matrix of holes each 100 mm that allow to adapt thermocouples of measurement easily, specially designed for such case.
The dimensions of the device are: base 800mm x 1000mm and with a height of 1500mm, mounted on a structure with wheels, to allow his movement.
Thermocouples of measurement is of curved type K, mounted on a ceramic case and in its end of measurement they have a copper disc of Ø15 mm and 1 mm of thickness. They consist of a compensated cable of variable length (according to the necessity) with a compensated connector male, mini type to accede directly to the measuring instrument.
The Blact Test Corner can be applied to the temperature test of all kinds of electronic products supply, in conformity with the standards requirement of the environmental conditions
Technical parameters:
1. Standard:IEC60335,IEC60065, IEC60950-1 : 2005
2. Thermocouple: the diameter of the thermocouple is less than 0.3mm; Import K
Type; Color: Black
3. The thermocouple arrangement: All leads on a connection line(optionally equipped with thermocouple plug and socket)
4. The sheet copper used for temperature measurement: the diameter of 15mm and the thickness of 1mm.
5. Plywood:The thickness is 20mm and the front side is painted with Berlin black and the reverse side is with gray film back.
6. The movable part: there are 4 removable wheels installed on the bottom of the device.
7. The height of the wheel is about 100mm. The top plate is equipped with hook whose load bearing is 15Kg.
8. Temperature patrol system needs to be equipped additionally
| Type |
Descriptions details |
| Dimension |
600×600×600mm |
800×800×1000mm |
1000×1000×1000mm (other) |
| Thermocouple |
φ<0.3mm Import: K type |
| Thermocouple disposal |
Disposal in a line bank( select and fit out thermocouple plug and socket); |
| Test temperature sheet copper |
Diameter15mm, thickness1mm sheet brass |
| Test temperature point |
20point, 32point, 48point(other) |
Test temperature
point disposal |
100mm x 100mm |
| Glued board |
Thickness about 20mm, Berlin black in face,Stick the gray sheet glued board in rear. |
| Active part |
Install 4 pieces active wheels |
| Provide |
Personalized Service |
Product Tags:
|
|
Temperature Measurement Heating Test Corner For Temperature Test Of Electronic Product Images
|
